RADWAG Low profiled scales - Manual (Page 20)

11. WEIGHING
Put a load you want to weigh on the weighing pan. When the
pictogram appears it means that the result is stable and ready to read.
Special line scales should be loaded with intended loads:
• For ramp scales (hand trucks used in meat industry) the platform
should be matched to the trucks with maximum weight and the
wheels were close to the load-bearing sections:
• For pallet scales (load on euro-pallets put on by pallet trucks)
the middle foot of the pallet should not be supported while
on the weighing platform:
• For beam scales – load of stiff, self-supporting structure
or in a stiff container:
- 20 -