Tarring – RADWAG Low profiled scales User Manual
Page 21
• For four load cell platform scales (pit version) – loads carried
and weighed together with trucks:
− Total weight of the truck and its load cannot exceed the
maximum value of the scale range,
− Trucks are allowed to drive through without braking and
accelerating with the maximum speed 2km/h,
− Platforms should be driven over only perpendicular to the
edge of the platform, in order to uniformly load the scale,
− Loads should be stand steadily and slowly,
− It is not permitted to push or pull loads on or from or over
the weighing platform.
11.1. Tarring
In order to determine the net mass put the packaging on the pan.
After stabilising press -
(Net pictogram will be displayed in the
left upper corner and zero will be indicated).
After placing a load on the weight pan net mass will be shown. Tarring
is possible within the whole range of the scale. After unloading the pan
the display shows the tarred value with minus sign.
- 21 -