Inscribing tare value, Alue, Inscribing tare v – RADWAG Low profiled scales User Manual
Page 22
Notice:
Tarring cannot be performer when a negative or zero value is being
displayed. In such case <Err3> appears on the display and short
audible signal will be emitted.
11.2. Inscribing tare value
You can also inscribe a tare value. While in weighings mode press:
• Press
simultaneously and
,
• You will see :
• Using
and
set the tare value,
• Press ,
• Program returns to weighings mode. The inscribed tare
value can be seen on the display with „–” sign,
• Tare can be inscribed anytime in weighings mode.
Notice:
1. You cannot inscribe a new tare value when the tare value in memory
is greater than zero. In the case of trying this the <Err3> message
will be displayed and short audible signal will be emitted.
2. Users can also enter up to 9 tare values to the scale memory
(see 15.10 of his manual).
- 22 -