Other parameters, Backlight function, Backlight for supplying from mains – RADWAG Low profiled scales User Manual
Page 34: Ing from mains, Backlight for supply
Advertising
14. OTHER PARAMETERS
The user can set parameters which influence the scale operation.
They are gathered in the submenu <P5.Othr> e.g. backlight and beep
signal. Enter this submenu <P5.Othr> according to chapter 10.2.
14.1. Backlight function
Program recognises the way the scale is supplied (mains, battery)
and automatically selects the way of operating on the backlight:
bl
– for mains,
blbt – for batteries or rechargeable battery pack.
14.1.1. Backlight for supplying from mains
Procedure:
• Enter the submenu <P5.othr> and then:
bL
no
-
backlight switched off
bL
YES
-
backlight switched on
bL
Auto
-
backlight switched off automatically if indication
becomes stable for about 10s
- 34 -
Advertising
This manual is related to the following products: