Measurement max force on the pan – latch, Totalizing, Force on the pan – latch – RADWAG Low profiled scales User Manual
Page 49: Measurement max
Advertising
15.7. Measurement max force on the pan – latch
Procedure:
• Enter
to
<toP> function:
• Confirmation of choice of <toP> function is indication
of the Max pictogram:
• Apply a force to the weighing pan,
• The display of scale will latch the maximum value of the force,
• Remove loads from the pan
• Before the next measurement press the
key.
Return to weighing:
• Press the
key twice.
15.8. Totalizing
Scale software is equipped in a totalizing function of single weighings.
The totalizing procedure can be documented on the printer connected
to the indicator.
- 49 -
Advertising
This manual is related to the following products: