RADWAG PUE C indicator - Manual (Page 19)

EXI-01-04-06-14-GB - 19 -
11.2. Return to weighing
NOTICE:
Changes introduced into the scale memory will be permanently
saved after return to weighing.
Press F key several times, keep pressing until message
<SAvE?> is seen.
Return to weighing
Upon noticing the message press: key – for changes confirmation or
key – for resigning. After completion of this procedure the scale returns
to weighing.
12.
WEIGHING
Place a load on a weighing pan. After noticing stability
pictogram,
, read the weighing result.
12.1. Tarring
In order to determine a net mass, deposit a package of load on a pan and
wait for the indication to be stable, next press TARE key - (indication
goes back to zero, Net symbol is displayed on the left side of the display).
After depositing a load on a pan, the display indicates net mass. Tarring
can be done repeatedly in full weighing range of the scale. When using tare