RADWAG PUE C indicator - Manual (Page 23)

EXI-01-04-06-14-GB - 23 -
Save changes and return to weighing:
See point - 11.2. – return to weighing.
NOTICE:
Upon activation the scale operates with a set basic unit.
12.6. Temporary weighing unit
This function allows users to choose unit for indication.
The unit is valid until the scale is switched off or until another unit is
chosen.
In order to perform the following procedure, operation mode <P4.2.Funi>
must be accessible, see point 14.1.1 – Enabling operating modes.
Procedure:
• Press F key
, next:
• Confirm selection of a given unit and wait for the scale to return to
weighing.
Selection:
A. When the basic unit is set to [kg], users can toggle between: [kg, lb
– not accessible for verified scales, N].
B. When the basic unit is set to [g], users can toggle between: [g, ct,
lb – not accessible for verified scales].