RADWAG PUE C indicator - Manual (Page 28)

EXI-01-04-06-14-GB - 28 -
13.5. Determining the minimal load
S_Lo parameter works for automatic tare.
The rule is that no automatic tare is performed until the indication drops
below S_Lo value (gross).
Procedure:
• Following point 11 of this manual enter <P2.Prnt> submenu, next:
Return to weighing:
See point - 11.2. – return to weighing.
14.
OPERATION MODES
14.1. Enabling operating modes (functions)
In this group of parameters users declare functions they want to use after
pressing F key - while in weighing mode.
Procedure:
• Following point 11 of this manual enter <P4.Func> submenu, next:
Select the digit to be set
Select the digit value