Determining number of accessible modes – RADWAG PUE C indicator User Manual
Page 29
Advertising
EXI-01-04-06-14-GB
- 29 -
no
- mode disabled
YES - mode enabled
NOTICE:
Enabling procedure for other operation modes is analogous to the one
described above.
Return to weighing:
See point - 11.2. – return to weighing.
14.2. Determining number of accessible modes
The user may decide whether upon pressing F key
all the operation
modes are to be accessible (option <ALL>), or only one, selected out of
the list.
Procedure:
• Following point 11 of this manual enter <P4.Func> submenu, next:
Advertising
This manual is related to the following products: