RADWAG PUE C indicator User Manual
Page 33
Advertising
EXI-01-04-06-14-GB
- 33 -
3. If a single element weight is not greater than a reading unit, then
message <Err5> is shown on the scale display (see point 19. Error
Messages), short sound signal is heard, next the scale returns to
weighing.
Function deactivation:
Press F key
twice.
14.4. +/- control referring to the inscribed standard mass
The program allows entering checkweighing threshold values (Min, Max.
Procedure:
• Enter <HiLo> function (first make the operation mode accessible -
see point 14.1):
• The program proceeds to window for setting the lower threshold (Min):
Select the digit to be set
Select the digit value
Advertising
This manual is related to the following products: