RADWAG PUE C indicator - Manual (Page 38)

EXI-01-04-06-14-GB - 38 -
14.7. Measurement of the max force – peak hold
Procedure:
• Enter <toP> function (first make the operation mode accessible - see
point 14.1):
• Max pictogram visible in upper part of the display is a confirmation of
toP function activation:
• Apply a force to the weighing pan. The display of scale
will latch the maximum value of the force.
• Remove loads from the pan.
• Before next measurement press
.
Function deactivation:
Press F key twice.
14.8. Totalizing
The program enables totalizing the mass of weighed loads and the
totalized mass printout (for EX scales the printout is disabled).
14.8.1. Operation mode activation procedure