RADWAG PUE C indicator - Manual (Page 39)

EXI-01-04-06-14-GB - 39 -
• Enter <Add> function (first make the operation mode accessible - see
point 14.1)
• „P” letter visible on the left of the display is a confirmation of <Add>
function activation:
14.8.2. Totalizing procedure
• Following point 14.8.1 enter <Add> function,
• Place the first load on a weighing pan. If the load is to be weighed in a
container, it is necessary to tare it before putting the first load into it,
its mass must be confirmed by pressing key after stabilization of
the indication (symbol on a display),
• Sum of weighings is displayed („▲” pictogram in the upper right-hand
corner of the display).
• Take off the load , the scale indication returns to ZERO, letter „P”
appears on the left,
• Place next load on the pan,