American Aimers Vision 1 Optical Headlight Aimer - Manual

Vision 1 manual pages 1-2 Page 1 of 1
http://www.hopkinsmfg.com/test2/vision_1_manual_pages_1-2.htm 8/5/99
Home
Vision Aimers
Vision 100
Warranty Registration
Vision 1
Instructions
Parts List
B4A
Instructions
Parts List
Aiming Screen Manual
LiteMate Trailer Wiring
Levels
Contact Information
Vision 1 Instruction Manual
Pages 1-2
INTRODUCTION AND EQUIPMENT PRECAUTIONS
Congratulations! You now have the most advanced headlamp aiming device in the world. The Vision 1™ Image Processing
Headlamp Aimer provides factory-precise analysis to the automotive aftermarket. Precision laser positioning, high
technology photometric analysis, and computer quick calculations make the Vision 1™ the most accurate headlight aiming
device available.
The versatility of the Vision 1™ System enables you to aim nearly any headlamp on any make of vehicle throughout the
world. Standard, auxiliary, fog, rectangular, round, or aerodynamic headlamps can be precisely aimed on low or high
beams, regardless of size.
The precise accuracy of laser technology is used to determine the vehicle centerline and optical center of the headlamps.
Computer image processing technology form the basis for the Vision 1™ System. It analyzes and displays the light pattern
as it would appear on the roadway ahead of the vehicle. Upon positioning the Vision 1™ in front of the headlamp, a digital
translation of the headlight beam is displayed on the monitor, graphically illustrating the ideal alignment position in inches or
centimeters. While viewing the monitor, you adjust the headlamp adjustment screws to align the beam pattern cross-hairs
with the visual aim indicators.
Aiming pads or adaptors are no longer a necessity and with the interchangeable plug-in aiming and language modules, your
Vision 1™ will never become obsolete and always be on the leading edge of technology.
This user manual should be read in its entirety before operating the Vision 1™ System. If you have any questions, please
contact a HOPPY® representative, at 1-800-390-7904 for further information.
PATENT PENDING IN THE UNITED STATES AND
FOREIGN COUNTRIES. FOR YOUR SAFETY, READ AND FOLLOW ALL CAUTION AND WARNING
LABELS AFFIXED TO YOUR EQUIPMENT.
Table of contents
[ Home ] [ Vision ] [ LiteMate ] [ Levels ] [ Contact Info ]