Advanced Technology International USA M200 - Manual

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: +1-800-815-6908 | Service: +1-847-329-9875 | Fax: +1-847-410-0094
Email: [email protected] | Web: http://www.tekvend.com
M200 Series Copier Controller
Product Overview
The M200 Series Copier Controller accepts one coin to vend one copy. That coin can
be a nickel (M205), dime (M210) or quarter (M225).
The M200 Series Controller's housing - similar to a tall and narrow "breadbox" -
allows for easy mounting on any of its three non-faceplate sides.
The M200 Series Controller runs safely off the low signal voltages of its attached
copier, and comes standard with both a copier specific sprig and bypass keyswitch.
Technical Specifications
• Accommodates 5 VDC to 30 VDC signals from copier
• Rugged tubular lock
• $70 cashbox capacity
• Dimensions: 16.5" x 5.75" x 6"
• Weight: 12 lb
Warranty
The M200 is warrantied against manufacturing defects for a period of one year from
date of shipment, to be determined by the serial number on the inside of its housing.
To honor legitimate warranty claims, Advanced Technologies (TekVend) agrees to
repair or replace at its discretion any M200 Series Controller found defective for
manufacturing defects within the warranty period specified. Advanced Technologies
(TekVend) additionally agrees to pay ground return shipping and insurance on these
warranty repairs or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair. Installer
is expected to use the original copier specific harness (sprig) supplied by Advanced
Technologies (TekVend), and install the M200 on the originally specified copier,
unless otherwise authorized.