Prevue Pet 1530 - Manual

Step 1&2: Insert
front panel (A) into
side panel (B) make
sure posts are
inserted into square
receptors. Repeat
steps for remaining
panels. Should now
have a square frame.
Step 3: Bolt inside
perch into inside of
cage using wing
nuts & washers
Step 4: Insert cage
top frame (C) with
posts into receptors
on each panel
Step 11:
Place top cup holder (D)
onto bracket. Thread
screws through cup
holder and ladder on
opposite side & secure
with nut. Insert cups
Step 7: Place both
pan bars onto
bottom frame of
cage & spread apart.
Insert bottom pan
into front slot.
Step 5: Insert four
flat screws into
bottom frame of
cage & tighten using
enclosed wrench
Step 6: Turn cage
on side and insert
casters
Step 9: Insert perch top
bracket onto top of cage
using, screws, nuts & a
phillips head screwdriver
Step 10: Insert screws
through ladder into top
of frame and secure with
nut. Slide top pan into
front slot
Final Step: Insert
seedguards into slots
on bottom frame of
cage. Secure by
locking attached pin
into slot on adjoining
seedguard
Assembly Instructions for Prevue Hendryx
   
KD Signature Series Line (Models 1520-1530)
Congratulations! You have made a wise decision by purchasing this precision engineered bird home
that will provide you years of enjoyment.
Prevue Pet Products, Inc. [email protected] 312-243-3624 / 800-243-3624
A
B
Step 8: Insert
bottom grill into
grooved slots
Step 12: Open front door
and insert cup holders
making sure all four
bracket posts are inserted
into slots. From the outside
of cage open side cup
doors and insert cups
C D
RV032003