Revolabs FLX VoIP - Manual

Microphone status:
green —unmuted
red —muted
grey —off
yellow —unknown
Handset battery status
Speaker status:
green — available
grey —off
yellow —unknown
Make call End call
Volume up
Volume down During call:
Start active
call menu
Handset call: Remove the dialer from the charger, leave microphones in the charger.
Ensure that the microphone status on the screen of the handset is
“off” (grey) for all microphones. Dial the number, and press the
key.
Conference call: Remove at least one microphone from the charger. Dialer and speaker
are optional to be removed from the charger. Dial the number, and
press the
key.
Switch between conference and handset call: At least one microphone must be out of the
charger. Press the left soft-key labeled “Handset” or “Speaker” to
switch between the two modes.
Use of components in charger tray: The dialer and speaker work and are active in the
charger tray. To enable the microphones in the charger tray, press the
multi-function button on the microphone to turn it on. Microphones
in the charger tray always start muted, and stay muted unless an
active call is taking place. During the call, you can mute and unmute
the microphone by pressing the button.
Mute / unmute
microphone
put caller on hold
start a conference call, dial second number, or use
recent calls / contacts
Transfer Call 1 to Call 2
Information about components and status
Change Volume, Equalizer, or Audio mixer setting
System information
FLX VoIP User Guide
After finishing a call, return the microphones,
speaker, and dialer back to the charger base!
FLX VoIP User Guide
To start a local conference call:
 Dial the first number, press
 Once the call is established, press
 Now dial the second number, press
 Once that call is established, press
to go back to the call on hold
 Select “Join” on the soft keys to
establish the conference
After finishing a call, return the microphones,
speaker, and dialer back to the charger base!
Microphone LED:
Blinking green: microphone unmuted
Blinking red: microphone muted
Blinking red / orange / green:
microphone connecting to
base station
Line status:
grey —line not in use
green —active call
orange —call on hold
yellow —incoming call