Sioux Chief Steel Support Bracket Heavy Duty PowerBar Mini Strut - Manual

Locate holes on bracket ends and secure bracket
to
3/8" threaded rod using washers and 3/8"
nuts. If desired, hardware can be installed both
above and below bracket. Install double nut
if specified.
Position tube or conduit into base of
TouchDown clamp.
Slide TouchDown™ clamps to desired location
within the bracket.
Ratchet bridge of TouchDown clamps down over
both posts evenly.
3
2
4
1
For larger pipe sizes or when insulation is re-
quired, use the TouchDown II™ clamp (purchase
separately) and install on the bracket with the
screws provided.
550-20
522-5501
#IS-523-3MS-TD
B.4/13
Additional TouchDown clamps can
be purchased in bulk and added to
the bracket before installing onto
threaded rod. Ideal when running
flexible gas lines.
Plenum Safe™ TouchDown Clamps are also avail-
able in polyvinylidene flouride (PVDF) material for
ASTM E84 requirements.
523F5500 – E84 PowerBar TouchDown for ½"
through 1" CTS.
550F20 – E84 TouchDown II for ½" thru 2" CTS.
523-3MS
523-3MSS2
523-3MSL
523-3MSS3
Heavy Duty PowerBar
Mini Strut
Heavy Duty PowerBar
Mini Strut
Installation Guide Installation Guide
™ ™
Made in USA
File 3163
24110 South Peculiar Drive
Peculiar, Missouri 64078
P
1 . 8 0 0 . 8 2 1 . 3 9 4 4
F 1 . 8 0 0 . 7 5 8 . 5 9 5 0