Kodak Sharp Focus User Manual

Cameo, Pc ( ), On/off mode

Advertising
background image

Congratulations! And thank you for buying a KODAK CAMEO
Camera. Your new compact, auto-focus 35 mm camera with
motorized film advance and auto-film rewind, makes taking
pictures easy. The camera uses any DX/DXN, 35 mm color or
black-and-white print film with a speed of ISO 100, 200, 400,
or 1000.

For warranty purposes, please keep your sales receipt

as proof of the date of purchase.

SPECIFICATIONS

Type: Compact, auto-focus 35 mm camera
LCD Panel: Display indicators for red-eye reduction, fill-flash/
flash-charging, flash-off, infinity-focus, self-timer, and the
frame number and battery symbol
Lens: 28 mm,

f/4.5; 3-element glass lens

Focus System: 4 zone active infrared AF system with focus
lock; optional infinity-focus mode
Viewfinder: Reverse-Galilean with bright line field of view and
AF aiming indicator; panoramic masking in panoramic mode
Film Speed: DX (ISO) 100 – 1000 for color or black-and-
white print film
Focus Range: Daylight: 2.5 ft. (0.8 m) to infinity
Flash Unit: Electronic with ISO 100/21˚, guide number of
26 ft (8 m); flash automatically turns on at low-light levels
Aperture:

f/13 – f/4.5

Shutter: 1/150 to 1.2 sec
Power Source: one 3-volt lithium KODAK K123LA (or
equivalent) Battery
Dimensions: 4.9 x 2.7 x 1.3 in. (123.5 x 68.8 x 32.7 mm)
Weight: 6 oz. (170 g)

Kodak and Cameo

1-97

Pt. No. 8B9641

are trademarks.

Printed in China.

LCD PANEL

GETTING TO KNOW YOUR CAMERA

P

C

( )

(20)

FILM

DOOR

(19)

TRIPOD

SOCKET

(18)

STRAP

POST

(17)

BATTERY

DOOR

(16)

FILM

WINDOW

(15)

VIEWFINDER

EYEPIECE

(14)

PANORAMIC

SWITCH

(26)

SELF-TIMER

INDICATOR

(28)

INFINITY-FOCUS

INDICATOR

(29)

FILL-FLASH/

FLASH-CHARGING

INDICATOR

(30)

FLASH-OFF

INDICATOR

(32)

RED-EYE-

REDUCTION

INDICATOR

(27)

PICTURE

COUNTER

(31)

BATTERY

SYMBOL

ENGLISH

This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.

NOTE: Your model camera has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits provide reasonable protection
against interference in residential use. The camera generates,
uses and can radiate radio frequency energy and, if not used in
accordance with the instructions, may cause interference to radio
communications. There is no guarantee that interference will not
occur. If this camera does cause interference to radio or
television reception, which can be determined by turning the
camera off and on, you may reduce the interference by the
following:
— Reorient or relocate the receiving antenna.

— Increase the separation between the camera and the

receiver.

— Consult the dealer or an experienced radio/television

technician for help.

Changes or modifications not approved by the party responsible
for compliance could void the user’s authority to operate the
equipment.

ATTACHING THE
CAMERA STRAP

Thread the short loop of the strap under the Strap Post
(18); pull the long loop through the short loop and pull
it tight.

LOADING THE BATTERY

This camera uses a 3-volt lithium KODAK K123LA (or
equivalent) Battery that supplies power for all camera
operations.
NOTE: This camera automatically turns off after
approximately 3 minutes to conserve battery energy.

Battery Tips

• Keep a spare battery with you at all times.

Lithium batteries perform consistently until they
suddenly die.

• Read and follow all warnings and instructions

supplied by the battery manufacturer.

• Keep batteries away from children.
• Do not try to take apart, recharge or short circuit the

battery, or subject it to high temperature or fire.

• Store batteries in their original packaging prior to use.

Low-Battery Indicator

It’s time to replace the battery when—
• the Battery Symbol (31) appears on the LCD Panel (3).
• the battery symbol on the LCD panel “blinks.”
• none of the indicators appear on the LCD panel.

LOADING THE FILM

If in sunlight, turn your back to the sun and load the
film in the shade of your body.
1. Slide the Film-Door Latch (9) down to open the

Film Door (20).

2. Insert the flat end of the film cartridge over the Film

Spindle (25). Push the other end of the film
cartridge down into the Film Chamber (24) until it
snaps into place. Do not force it into the film
chamber.

3. Pull out the film leader until the tip reaches the Film-

Load Mark (21). Lay the film flat between the film-
guide rails.

NOTE: If the Picture Counter (27) on the LCD
Panel (3) blinks “0,” the film is not loaded correctly.
Open the film door and reload the film.

TAKING PICTURES

1. Press the On/Off Button (2)

to turn the camera ON.
When you turn the camera
on, the lens cover
automatically opens.

2. Hold the camera steady.

Be careful not to cover
the flash, lens, and
auto-focus windows
with your fingers.

3. Look through the Viewfinder Eyepiece (15) and center

the auto-focus brackets on your subject. For a sharp
picture, stand at least 2.5 ft (0.8 m) from your
subject.
When your subject is within 2.5 to 4 ft (0.8 to
1.2 m) from the camera, position the subject below the
top format/panoramic indicators.

4. Gently press the Shutter

Button (1) completely
down to take the picture.
The film automatically
advances to the next frame.

2. Compose your picture within the Viewfinder

Eyepiece (15) and press the Shutter Button (1).

3. Slide the panoramic switch down to return to the

normal position.

2. Partially depress and hold the Shutter Button (1) to

lock the focus.

3. While still partially depressing the shutter button,

move the camera until your subject is where you
want it within the Viewfinder Eyepiece (15).

Using the Focus Lock

This camera automatically focuses on whatever is
within the auto-focus brackets of the viewfinder
eyepiece. If you want to take a picture with the subject
positioned outside of the auto-focus brackets, use the
auto-focus lock as follows:
1. Place the auto-focus brackets on the subject you

want focused in the picture.

ON/OFF

MODE

(13)

LIGHT

SENSOR

(12)

SELF-TIMER

LAMP

(9)

FILM-DOOR

LATCH

(8)

FLASH

(7)

VIEWFINDER

(6)

SELF-TIMER

BUTTON

(5)

REWIND
BUTTON

(4)

MODE-SELECTION

BUTTON

(3)

LCD

PANEL

(2)

ON/OFF

BUTTON

(1)

SHUTTER

BUTTON

( )

F I L M T I P

P

C

ON/OFF

MO

DE

ON/OFF

Printing Panoramic Format Pictures:
If you took panoramic pictures on the entire roll of film, ask
the processing-lab clerk to print the film only in the
panoramic format. If there are panoramic and normal
format pictures on the film, ask the clerk to print the film in
both the normal and panoramic formats. (Normal format
prints are 3 1/2 x 5 in. [88.9 x 127 mm] or 4 x 6 in. [102 x
152 mm], whereas panoramic format prints are 3 1/2 x
10 in. [88.9 x 254 mm].) You may want to consult the
processing lab for development time and cost, and don’t
forget to check the optional panoramic box on the
photofinishing envelope.

4. Press the shutter button completely down to take

the picture.

Continued on reverse side

P

C

VIEWFINDER

VIEWFINDER

© Eastman Kodak Company, 1997

Consumer Imaging

EASTMAN KODAK COMPANY • Rochester, NY 14650

VIEWFINDER

AUTO-FOCUS

BRACKETS

FORMAT/
PANORAMIC
INDICATORS

VIEWFINDER

AUTO-FOCUS
BRACKETS

4

4

3

3

2

2

1

1

P
C

ON/OFF

MODE

4. Close the film door. The film automatically advances

to the first frame and the LCD Panel (3) displays “1.”
Do not open the film door after you start taking
pictures or you will ruin the film.

If the end of the film extends past the film-

load mark, gently push the excess back into the
cartridge.

P

( )

F I L M T I P

C

Taking Panoramic Pictures

(without changing

rolls of film, you can switch between the panoramic
and normal formats)
The panoramic selection allows you to take wide-angle
shots, such as large groups, football and baseball
fields, landscapes, tall buildings, waterfalls, etc.
Note to Owners of the Quartz Date and Time
Model:
Date and time imprinting is not available in the
panoramic format.
1. Slide the Panoramic Switch (14) from normal to the

panoramic position. The Viewfinder (7) changes to
show the selected field of view.

Need help with your camera? Call Kodak (United States only) toll

free from 8:00 a.m. to 8:00 p.m. (Eastern time) Monday through

Friday at 1 (800) 242-2424.

CAMEO

SHARP FOCUS
CÁMERA

(10)

AUTO-FOCUS

WINDOWS

P

C

( )

F I L M T I P

(24)

FILM

CHAMBER

(21)

FILM-LOAD

MARK

(22)

FILM

TAKE-UP

SPOOL

(23)

DX-CODE

SENSORS

(25)

FILM

SPINDLE

(11)

LENS COVER/

LENS

Advertising