Lenovo ThinkPad T41p - Manual (Page 18)

Installing the standalone IBM Access Connections
To install IBM Access Connections 3.0 or later without user interaction, do the
following:
1. Start Windows 2000 or Windows XP, and then log on with administrative
privileges.
2. Extract the Access Connections drivers to the hard disk drive.
3. Click Start , then click Run .
4. Type one of the following commands:
a. For computers that do not automatically restart, type this command:
SETUP.EXE -S -SMS
b. To install from a CD, type this command:
SILENT.BAT
You can download the software package along with the installation instructions
from the Web at:
http://www.pc.ibm.com/us/think/thinkvantagetech/downloads_support.html.
From that page, click Software download and User’s Guide to download the
software package
Enabling the Administrator Feature
To enable the Administrator Feature of Access Connections, you must first have
Access Connections 3.0 or later installed on a donor computer.
When deploying location profiles that provide a wireless network connection, the
donor and recipient computers must contain wireless adapters which support the
capabilities defined in the location profile. For instance, if the location profile being
deployed is configured for LEAP authentication, the adapters on the recipient
systems must support LEAP authentication.
To enable the Administrator Feature, do the following:
1. Obtain the Administrator Feature Enabler and save it on the computer on
which you will develop location profiles. (http://www-
3.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY)
2. Click Start --> Run , and then click Browse . Select the self-extracting executable
file that you saved in step 1.
3. Click OK . This will extract the Enabler application to C:\Program
Files\Thinkpad\ConnectUtilities.
4. Close the main window of Access Connections if it is open.
5. Click Start --> Run , and enter C:\Program
Files\Thinkpad\ConnectUtilities\AdmEnblr.exe
12 IBM Access Connections Deployment Guide Version 3.3.0