Rail kit package – Lenovo ThinkServer RD530 User Manual
Page 4
Rail kit package
Before you begin the rack installation, remove all the parts from the rail kit package shipped with your
server and lay all the parts on a working surface.
Notes:
• An optional cable management arm can help you to manage your cables. Contact your local Service
Provider to purchase the cable management arm and refer to the later part of this section for more
information about the cable management arm.
• All the parts related to the cable management arm in the following figures are made in grey. This indicates
that they are optional.
The rail kit package contains the following parts. Contact your place of purchase if any part is missing or
damaged.
Figure 2. Parts in the rail kit package
1
Slide rails (2)
5
M6 x 16 screws (2)
2
Bar-rail joint
6
Cable management arm
3
Cable manager
7
Arm-rail joint
4
#10-32 x 10 screws (2)
8
Crossbar
4