Lenovo ThinkServer TD100x - Manual (Page 100)

EasyStartup problems
Table 7. ThinkServer EasyStartup DVD
v Follow the suggested actions in the order in which they are listed in the Action Column until the problem
is resolved.
v See the Hardware Maintenance Manual to determine which components are customer replaceable units
(CRU’s) and which fields are field replacable units (FRU’s).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Symptom Action
The ThinkServer
EasyStartup DVD will not
start.
v Make sure that the server supports the EasyStartup program and has a startable
(bootable) CD or DVD drive.
v If the startup (boot) sequence settings have been changed, make sure that the CD or
DVD drive is first in the startup sequence.
v If more than one CD or DVD drive is installed, make sure that only one drive is set as
the primary drive. Start the CD from the primary drive.
The EasyStartup
program cannot view all
installed drives, or the
operating system cannot
be installed.
v Make sure that the hard disk drive is connected correctly.
v Make sure that the SAS hard disk drive cables are securely connected.
The operating-system
installation program
continuously loops.
Make more space available on the hard disk.
84 ThinkServer TD100 and TD100x Types 4203, 4204, 4205, 4206, 6398, 6399, 6419, and 6429: Installation Guide