Avocent 5240 - Manual (Page 76)

64 MergePoint 5224/5240 Service Processor Manager User Guide
Using hotkeys during console sessions
MindTerm hotkeys have two components: an escape sequence and a command key. The escape
sequence for all the console session hotkeys is
Ctrl + e + c (shown as ^Ec ). As shown in Figure A.1,
Settings
(continued) VT 2
•
Scroll to Bottom On Tty Output
• Visible Cursor
• Local Echo
• Visual Bell
• Map <CTRL>+<SPC> to ^@
• Local PgUp/PgDown
• Use ASCII for line draw
• Backspace sends: del, bs, erase
• Delete sends: del, bs, erase
Auto Save Settings Enables and disables the automatic saving of
settings. When this option is enabled [default],
settings are saved automatically whenever you
disconnect from a server or exit the terminal.
When this option is disabled, you must explicitly
save settings to a file in order to preserve them.
Tunnels Setup Displays a dialog box listing any previously
configured tunnels. Clicking the Add button
displays a dialog box for configuring a tunnel.
Type
•
Local
• Remote
Bind address
•
localhost
• all (0.0.0.0)
• ip
Bind port
Dest. address
Dest. port
Plugin
•
None
• ftp
Help About MindTerm Displays a dialog box with information about the
Mind Term build date, version, platform you
are running.
Table A.1: Console Session Terminal Menu Options (Continued)
1st - level Option 2nd - level Option Description