Konica Minolta HDD Backup Utility - Manual (Page 9)

Introduction 1
HDD Backup Utility 1-3
1.4 General operation
The following operations must be performed in order to use the HDD Backup
Utility to back up or restore the data for the multifunctional product.
To back up or restore
The HDD Backup Utility is an application used by administrators of multi-
functional products. The HDD Backup Utility should be used by the admin-
istrator of the multifunctional product to back up or restore the data.
1
Install the HDD Backup Utility onto the computer.
– % “Installing the HDD Backup Utility” on page 2-1
2
Start up HDD Backup Utility.
– %“Starting up the HDD Backup Utility” on page 3-1
3
Register the multifunctional product to be backed up.
– Refer to “Device Set-Up User’s Guide”.
4
Back up the data from the media installed in the registered multifunc-
tional product.
– % “Backing up” on page 5-1
5
If desired, restore (recover) the data to the media of the multifunctional
product.
– % “Restoring” on page 6-1