Konica Minolta bizhub PRESS C7000P - Manual (Page 85)

IC-601 6-47
6.4 Job Operation in the Main Body (Main Body Hold/HDD) 6
Store Job into the HDD of the Main Body
This section describes how to store the job in the hold queue of the main body into HDD of the main body
using [Output] function.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
[Main Body Hold/HDD] screen appears.
% When the user authentication/account track is set to the main body and you click [Main Body
Hold/HDD] tab, [User Auth/Account Track] screen appears. In this case, [Main Body Hold/HDD]
screen appears after authentication. For the authentication operations, refer to page 5-3.
2
Select the job to store from [Hold Job] list.
The selected job is highlighted.
% You can not store when you select multiple jobs.
3
Click [Output].
[Output] screen appears.
% You can also operate by using [Output] from the right click menu.
% You can also operate by using [Job Operations] menu - [Output].
4
From [Output Method], select [Main Body HDD] and click [OK].
[Select Folder] screen appears.
5
Select the destination folder and click [OK].
The job is stored into HDD of the main body.
% When you click [Create Folder], you can create new folder as the destination. For detailed informa-
tion on how to create the new folder, refer topage 6-52.
% When the password is set to the folder, [Folder Password] screen appears. In this case, enter the
password, and click [OK].