4 registering the basic information, 1 to begin operation, 1 environment and device requirements – Konica Minolta bizhub 42 User Manual
Page 29: 2 connection and settings of network cable, Connection of network cable, Registering the basic information, To begin operation -2, Environment and device requirements -2, 4registering the basic information
bizhub 42/36
4-2
4.1
To begin operation
4
4
Registering the basic information
This section explains the necessary settings and registrations before using the scan functions of this ma-
chine.
4.1
To begin operation
The following registrations are required in order to use this machine.
4.1.1
Environment and device requirements
The following environment and devices must be prepared to use various functions of this machine.
4.1.2
Connection and settings of network cable
To send image data over the network, such as the Network scan and application scan functions, connection
and settings of the network cable are required.
Connection of network cable
Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector
on the machine.
It supports 1000Base-T, 100Base-TX, and 10Base-T standards.
Functions
Environment and device
Network scan function
•
Connection of network cable
•
Network settings
Application scan function
•
Connection of network cable
•
Network settings
•
Installation of scanner driver