Konica Minolta bizhub 42 - Manual (Page 30)

bizhub 42/36 4-3
4.1 To begin operation 4
Network settings
An IP address must be assigned to the machine and settings, such as the SMTP server, must be specified in
order to use the machine on the network. For the detailed procedure, refer to the [User's Guide Administrator
Operations].
Specifying an E-mail address for this machine
An E-mail address must be registered to this machine to send scanned data via E-mail. This E-mail address
is used for sending/receiving data. It is recommended that the E-mail address registered for the administrator
be used.
If the E-mail address registered for this machine is not specified, the From address must be entered for each
Scan to E-mail operation. Note that Scan to E-mail operations are not possible if a From address is not en-
tered.
Reference
- If User Authentication is enabled, the E-mail address specified for each user will be From address.
d
Reference
For details on setting the E-mail address for this machine, refer to the [User's Guide Administrator Opera-
tions].