Konica Minolta bizhub C3110 - Manual (Page 57)

bizhub C3110 5-3
5.1 Preparation for network connection (for administrators) 5
5 Initial Settings of This Machine
5.1 Preparation for network connection (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 3-4.
Assigning an IP address
If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel, select [UTILITY] - [Admin Settings] - [ETHERNET] - [TCP/IP] - [IPv4 Settings], then con-
figure the following settings.
Tips
- To check the IP address assigned to this machine, print out the Configuration Page. To print out the
Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen.
Settings Description
[IP ADDRESS] When manually specifying the IP address, enter the fixed IP address assigned
to the machine.
[SUBNET MASK] When manually specifying the IP address, enter the subnet mask.
[DEFAULT GATEWAY] When manually specifying the IP address, enter the default gateway.
[IP App Auto Setg] When automatically specifying the IP address, select the method for automatic
retrieval.
•
[DHCP]: [ON] is specified by default.
• [BOOTP]: [OFF] is specified by default.
• [ARP/PING]: [OFF] is specified by default.
• [AUTO IP Settings]: Fixed to [ENABLE].