Konica Minolta KIP Color 80 - Manual (Page 21)

KIP Print
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 18 -
Graphic Toolbar – 2 Up Printing
2-UP PRINTING activates the automatic 2-UP printing
feature. This will allow the user to very quickly print files 2-UP
for production printing of half size. 2-UP sizes are determined
by a pre-configured data file that will automatically set the
2-UP size depending on the actual size of the original file
noted in the Enlarge/Reduce column.
As an example, the “2-Up” button was selected, then files of various sizes loaded:
Notice that different original image size files but only some files have “2up” schemes and some have
different type of schemes. The variables of the “2up”schemes are governed by the “2upprinting.dat” file
located in the folder of \Documents and Settings\All Users\Application Data\IPS\IPSPRINT on the
workstation. The various settings within this configuration file govern what would occur for the 2up
printing when a certain file size is selected.
As a default A, B , A4 &A3 sizes are noted scaled for 2Up. Other standard image sizes (C, D, E, A2, A1, &
A0 ) have default 2up parameters that permit scaling and image placement.