Konica Minolta KIP Color 80 - Manual (Page 24)

KIP Print
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 21 -
Graphic Toolbar - Pen Table
PEN TABLES are additional instruction sets for HPGL/2 or HP-RTL files, and are only applied to these file
types. These tables include data for pen widths, raster density, dither patterns, junctions, etc.
Use Colors
This applies a file’s native pen width information, and half toning information. Unless you
are making changes to a customer’s file, USE COLORS is the setting most often used.
When USE COLORS is applied, the Pen Table is shaded.
Force Pens
KIP Print allows you to edit pen widths and screening by pen number (with a range of
Pen 0 to Pen 255.) This forces the settings in the KIP Pen Table to override the pen
information originally embedded in the file. Most users will only need to Force Pens if the
customer needs to make changes to an existing file.