Konica Minolta KIP Color 80 - Manual (Page 26)

KIP Print
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 23 -
Clip to Image Size
Crops the file data to the start of image data. Apply when the file designer has saved
the entire drawing area as part of the file. If an error “File Too Large To Print,” occurs,
clipping to Image Size is often the solution.
Use Round End Capping
Forces end capping on lines in vector files to round ends.
Turn Merge On
This enables the user to merge lines of different shades. When not applied, the layers
within the plot file determine how lines merge on each other.
Raster Photo Mode
When a raster image has been embedded within a plot file, Raster Photo Mode should
be used. Raster Photo Mode can be applied to all drawings, whether they contain
raster images or not.
Raster Density Level
This slide bar will modify the density level of the embedded raster image. The scale range
is from 0-100. The higher the number on the scale, the darker the image will be. A density
level can also be keyed into the text field.
Photo Dither Pattern (Raster)
Users have 3 choices of raster dither output patterns. There is no ‘correct’ setting. Set
according to user preference.
Pen Tables
1. Pen widths and page sizing are usually included as a part of modern HPGL/2 plot files. If
using legacy HPGL image data, please ensure that a pen table is created for the
installation requirements.
2. Raster and Hybrid files are quite common. Please see the “Advanced” button under
“Pen Table” for any customization required. The final result on the print may be your best
guide when establishing desired settings.