Konica Minolta KIP Color 80 - Manual (Page 42)

KIP Print
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 39 -
Requested Time/Date
Users can select a job be printed at a certain time for scheduling of printing. This
feature needs to be turned on in the KIP Print.ini file. Set the entry IgnonreTime= to
False, this will tell the software not to ignore the time associated with the job ticket
and schedule the job to print at the specified time.
Media Type
This field allows the selection of the type of media the job is to be printed on.
Types include bond, vellum, and film (Mylar). Applying the “On Hold” media type
will place the job in the queue but will not print until a valid media type is applied
by the queue Manager.
# of Copies
This field chooses the total number copies from 1 to 999.
Collate
This field allows collated or un-collated prints.
111, 222, 333… or 123, 123, 123…
Cut Sheet
When activated in the IPSPrint.ini file this feature allows the user to print directly to
the cut sheet bypass. Only one sheet at a time may be printed and a force size
setting MUST be selected in order to print.