To change the software sw, To change the software sw -23 – Konica Minolta bizhub 200 User Manual
Page 290
Advertising
Various settings
11
200/250/350
11-23
To change the software SW
1
Log on to the administrator mode, and then touch [Admin. 2].
–
For details on displaying the Administrator Management 2 screen,
refer to “Administrator settings” on page 11-16.
The Initial Settings screen appears.
2
Touch [Software SW].
3
Touch [Mode Selection], and then use the keypad to type in the mode
number.
Advertising
This manual is related to the following products: