Konica Minolta bizhub PRO 950 - Manual (Page 74)

Installation of the printer driver (Macintosh) 5
bizhub PRO 950 5-11
Specifying the AppleTalk settings
Enable AppleTalk in “AppleTalk Setting”, and then enter the printer name.
For details on the AppleTalk settings of this machine, refer to the User’s
Guide [Network Administrator].
Specifying the AppleTalk settings for the computer
1
On the “Apple” menu, select “System Preferences”.
2
Click the “Network” icon.
3
From “Show”, select “Built-in Ethernet”.
4
Click the AppleTalk tab, and then select the “Make AppleTalk Active”
check box.
5
Click the close button at the upper left corner of the dialog box.
– When the “Apply configuration changes?” message appears, click
the [Apply].
Adding a printer
1
Select “HDD” - “Applications” - “Utilities” where the driver was in-
stalled, and then double-click “Printer Setup Utility” to open it.
2
When the Add Printer dialog box appears, click the [Add]. When the
printer list appears, click the [Add].
The connected printers are detected.
3
Select [AppleTalk] as a connection method, and then select an intend-
ed printer name from among those detected.
4
Select “KONICA MINOLTA” in “Printer Model”, select the desired mod-
el from the list of models, and then click the [Add].
– If the selected printer is registered in the printer list, the setting pro-
cedure is completed.