2 [paper, Paper] -6, P. 3-6 – Konica Minolta bizhub 552 User Manual
Page 27
bizhub 652/552
3-6
3.2
[Basic]
3
3.2.2
[Paper]
Select the paper type and size to be printed or change the paper size and paper type settings configured for
each paper tray.
0
The auto zoom setting and the auto paper setting cannot both be selected at the same time.
0
Be sure to specify the paper type when special paper is loaded into a paper tray.
0
If the paper size or type is not correctly specified, a paper jam may occur or image quality may deteri-
orate.
%
Press [Basic] ö [Paper].
Settings
[Auto]
The paper size is automatically selected according to the original size.
Trays [1] - [4]
Select the corresponding try button to manually select the desired paper.
[L] (Optional LCT)
# (Bypass Tray)
[Change Settings]
Press this button to specify the paper type and size for the selected paper
tray.
[Paper Type]
Specify the paper type for the selected paper
tray. There are limits on the types of paper that
can be loaded in a paper tray.
•
A paper tray with the [Single Side Only] setting
selected is given priority when the single-side
printing is specified.
•
[Duplex 2nd Side] (only for Bypass Tray): Se-
lect this setting in combination with the paper
type to print on paper with data printed on one
side.