Konica Minolta bizhub PRESS C1085 - Manual (Page 18)

Turning the Power ON/OFF 2
2-6 bizhub PRESS C1100/C1085
2.1
Tips
- The Image Controller IC-308/IC-310 can reset Fiery software or restart the entire system as needed.
– To reset only the Fiery software, press the Menu button on the control panel, then use the row selection
button to select [Restart Server] - [Restart Server] in sequence. In this case, do not reboot the Windows
operating system.
– To reboot the entire system including the Windows operating system, press the Menu button on the
control panel, then use the row selection button to select [Restart Server] - [Reboot System] in se-
quence.
– You can set the Image Controller IC-308 to turn on or off at the same time when the power of the main
body is turned on or off. For details, refer to the User's Guide supplied with the Fiery Color Server.
Power saving function
Using the following functions can reduce the power consumption of this machine and provide greater power
saving effects.
Function Description
Power Save
function Auto Low Power Turns off the touch panel display to reduce the power con-
sumption of this machine. This machine is placed into the Auto
Low Power mode when:
•
The specified period of time has elapsed with no print jobs
executed in the printable state
• Power Save on the control panel has been pressed for a
second or more
This mode is available when [Auto Low Power] is selected by
selecting Utility/Counter - [Administrator Setting] - [System
Setting] - [Power Save Setting] - [Power Save Function Set-
ting].
There are eight power saving time periods available: 5, 10, 15,
30, 60, 90, 120, and 240 minutes, from which you can select
the desired one.
Auto Shut OFF Turns off all LEDs except Power Save and Power LED on the
control panel, to reduce the power consumption of this ma-
chine. This machine is placed into the Auto Shut OFF mode
when:
•
The specified period of time has elapsed with no print jobs
executed in the printable state
• Power Save on the control panel has been pressed for a
second or more
If the Auto Shut OFF mode is kept for a long time, it may take
a while to warm up this machine upon restart.
This mode is available when [Auto Shut OFF] is selected by se-
lecting Utility/Counter - [Administrator Setting] - [System Set-
ting] - [Power Save Setting] - [Power Save Function Setting].
There are seven power saving time periods available: 0, 1, 30,
60, 90, 120, and 240 minutes, from which you can select the
desired one.
ErP Setting Turns the main power off after the Auto Low Power mode, Auto
Shut OFF mode, or the sub power switch is kept in the off
state for the specified period of time.
There are six power saving time periods available: Do Not
Switch, 12, 24, 36, 48, 60, and 72 Hours, from which you can
select the desired one.
If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting]
appears dimmed and you cannot configure this setting.
Weekly Timer Automatically turns the power of this machine on or off based
on the specified time or day of the week.