Konica Minolta Digital StoreFront - Manual (Page 42)

42
Having different pages (Classic Product Builder)
For some products, you can indicate that you want some pages treated differently from the rest of the
job. These pages are also known as special pages. For example, most of the job may be printed in
black-and-white, but the cover needs to be printed in color on different paper.
In Classic Product Builder (options followed by preview), if you can define special pages for a product,
the Add Special Page(s) button is available when you are customizing the product.
To define special pages
1. To identify pages that should be treated differently, click Add Special Page(s).
2. Select one of the following:
• By File to apply all the special page settings to all the pages in the selected file. Suppose that
you have a multi-file job. If the overall job is to be printed in black-and-white, but you want to
print the cover in color on different stock, and the cover is in its own file, you would select By
File for the file with the cover.
• By Page(s) to specify certain pages in the document for special formatting. You could use this,
for example, in a single-file job where you wanted certain pages treated different. Specify
individual pages separated by commas (for example, 3, 6, 9) and/or specify ranges of page (for
example, 3-6, 10-12).
3. Under Paper/Media, select the paper for the special pages.
4. Select the Scale to Fit check box so that the contents on the special pages are sized to fit the
selected media.
5. Select Print in Color or Print in Black and White.
6. For Sides, select Double Sided (Tumble), Double Sided, or Single Sided.
7. Click Save.