Konica Minolta bizhub PRO 1200 - Manual (Page 21)

3 Before Using the Scanning Features
3-2 bizhub PRO 1200/1051 Scanner
Be
fo
re Using t
h
e
Scan
ning
F
eat
ur
es
Chapter 3
3 Before Using the Scanning Features
3.1 About the Control Panel
For detailed information on names and functions of various parts of the Con-
trol Panel, refer to the User's Guide (Copy).
No. Name Description
1 Keypad Enters values for various settings, including print quantity and
password.
2 [Reset] key Restores machine to the initial settings.
3 Power LED Lights up in red when the main power switch is turned on,
then turns green when the sub power switch is turned on.
4 Data LED Flashes while receiving print data.
5 [Interrupt] key Stops copying/printing/scanning in progress to allow a sim-
ple copying job.
6 [Stop] key Ceases the copying sequence; deletes the stored memory.
7 [Proof Copy] key Prints a single set of sample copy to check whether the cur-
rent settings are specified properly.
8 [Start] key Activates various machine operations.