Konica Minolta bizhub PRO 1200 - Manual (Page 19)

Chapter 1: Preparation for Use Set the Paper to the tray
1-9
1
2
3
4
6
7
5
Preparation for Use
Loading Paper (PF-702)
• Be sure that the machine is powered ON before withdrawing the tray.
• Only one tray can be withdrawn at a time.
1.
Withdraw the tray to be supplied with paper.
2.
Open the feed roller.
3.
Place paper on the tray with any curl turning up, then move
the side guide plates and the rear edge guide to the edge of
the paper.
● Load paper with print side face up in the tray aligning it to the paper
feed roller side of the tray.
Press the lock release lever of the front side guide to move the side
guides, and also move the rear edge guide to the edge of the paper.
4.
Push in the tray until it locks into place.
● The indicator on the Machine Status Screen or Copy Screen will
change to .