Konica Minolta MSP3500 - Manual (Page 125)

2. Initial Settings
7-7
Misce
llane
ou
s
Chapter 7
Entering and Leaving the User Mode
1 Hold down the Shift key and Output Selection key at the same time for 0.5 sec.
The Multi-Print Display displays a “U.”
O utput
S election
S hift
U ser Mode
2 Press the Exposure Adjustment key (Darker or Lighter) to select the specific function.
D arker
Pressing the Darker key selects the function in the following order: U
→ U1
→ U2 → U3 .. → U8.
L ighter Pressing the Lighter key selects the function in the following order: U8
→ U7
→ U6 → U5 .. → U.
3 Press the Exposure Mode key to display d(*).
*: Current setting value
A uto
Z oom clr
4 Press the Exposure Adjustment key (Darker or Lighter) to select the specific setting
value.
D arker
Pressing the Darker key selects the setting value in the following order: d0
→
d1 ..
L ighter
Pressing the Lighter key selects the setting value in the following order: d5
→
d4 .... d0
5 Press the Start key to validate the setting value.
S tart
If the Exposure Mode key is pressed, the setting value is not validated and the User
mode initial screen (U) appears.
If a new function is to be set, start the procedure over beginning with step 2.
6 Press the Clear key.
This lets you leave the User mode, returning back to the ordinary mode.