Changing a program, Changing a program -12 – Konica Minolta bizhub C200 User Manual
Page 36
Advertising
C200
2-12
Control panel/touch panel
2
3
Touch [Program].
4
Touch the one-touch dial button to be programmed.
5
Type in the program name, and then touch [Next].
–
The program name can contain a maximum of 24 characters.
Changing a program
Program settings can be changed.
1
Change the settings.
Quality: Document type settings can be changed.
Menu: Transmission settings can be changed.
2
Press the [Mode Check] key.
3
Touch [Register].
4
Touch [Program].
5
Touch the one-touch dial button for the program that is to be changed.
6
Check the message that appears, and then touch [Yes] to overwrite the settings.
–
To change the program name, change the name.
7
Touch [OK], and then touch [OK] in the next two screens that appear.
Advertising