Konica Minolta bizhub 20 - Manual (Page 149)

Printing and Faxing
141
8
Using the BR-Script3 Driver
(Post Script
®
3™ language emulation printer driver)
8
Note
• To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script 3 by using the
control panel before connecting the interface cable. (See Printer Emulation Support on page 126.)
• The BR-Script3 printer driver does not support the PC-Fax Sending.
• For network users, see the Network User’s Guide for installation steps.
You need to install the BR-Script3 printer driver using the following instructions.
Note
If you use a USB cable and Mac OS, only one printer driver for a machine can be registered in the
Printer Setup Utility (Mac OS X 10.3.9 to 10.4.x) or Print & Fax in System Preferences (Mac OS X
10.5.x and 10.6.x). If a KONICA MINOLTA Laser driver is already listed in the Printer list, you will need to
remove it and then install the BR-Script3 printer driver. For the information about removing the printer
driver, see Removing the Printer driver for Macintosh on page 140.
„ (Mac OS X 10.3.9 to 10.4.x)
a
Choose Applications from the Go menu.
b Open the Utilities folder.