Konica Minolta bizhub 20 - Manual (Page 172)

Scanning
164
9
„ Adjust Image
• Brightness
• Contrast
c Click Start.
When scanning has finished, the image appears in your graphics application.
Scanning a duplex document
9
a
Load your document.
b
Check Duplex (two-sided) Scanning and choose Long-edge binding or Short-edge binding.
c Adjust the following settings, if needed, in the Scanner Setup dialog box:
„ Resolution
„ Scan Type
„ Document Size
„ Adjust Image
• Brightness
• Contrast
d Click Start.
Note
• You cannot adjust the scanning area.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.