Twain lock time, Twain lock time -36 – Konica Minolta bizhub C300 User Manual
Page 147
Advertising
3
Specifying settings from the control panel
3-36
C300
Sp
ecifying
se
tt
ing
s
f
ro
m
th
e cont
ro
l pan
el
Chapter 3
TWAIN Lock Time
The machine’s operation lock time of the control panel during scanning (ex-
cluding PUSH scan) can be specified (initial value: 120 seconds).
1
In the User Setting screen, touch [5 Scanner Setting].
–
To display the User Setting screen, refer to page 3-7.
2
Touch [TWAIN Lock Time].
3
Press the [C] (clear) key to erase the value, and then use the keypad to
type in a time period (between 30 and 300 seconds).
–
If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.
4
Touch [OK].
The TWAIN lock time is set.
Advertising