Placing the document on the original glass, Placing the document on the original glass -19 – Konica Minolta bizhub C451 User Manual
Page 28
Advertising
Before use
1
C451
1-19
Be
fo
re
u
s
e
Chapter 1
Placing the document on the original glass
1
Lift open the ADF.
– When placing the document on the original glass,
be sure to lift open the ADF at least 20°. If the
document is placed on the original glass without
the ADF being lifted at least 20°, the correct
document size will not be detected.
2
Place the original on the original glass with the
side to be scanned faces down.
– Load the original pages so that the top of the
original is toward the back or the left side of the
machine.
When loaded in the v orientation: When loaded in the w orientation:
20°
20°
Advertising