Konica Minolta bizhub 42 - Manual (Page 36)

bizhub 42/36 4-10
4.3 Utility/Counter 4
[Sound Settings] [Caution Sound]
•
[Low Caution Sound (Level 1)]: A sound produced when the replace-
ment time is nearing for supplies or a replaceable part and a message
appears in the Touch Panel
• [Low Caution Sound (Level 2)]: A sound produced for a user error
• [Low Caution Sound (Level 3)]: A sound produced when an error occurs
that can be corrected by the user by referring to the message that ap-
pears or the User's Guide
• [Severe Caution Sound]: A sound produced when an error occurs that
cannot be corrected by the user or requires action by a service repre-
sentative
[Touch Panel Adjustment] If no normal reaction is returned after pressing a key on the Touch Panel,
the key display position on the Touch Panel may not be correctly aligned
with the actual position of the touch sensor.
Adjust the display position of the Touch Panel.
•
Press the four check point buttons [+] on the Touch Panel adjustment
screen while listening on a buzzer sound each time. When the checking
by pressing the check point buttons is completed successfully, the in-
dicator on the Start key lights up in blue. Press the Start key.
• The check point buttons [+] can be pressed in any order.
• To perform adjustment again, press the C (Clear) key, and then press
the four check point buttons [+] again.
• To cancel the Touch Panel adjustment process, press the Stop or Re-
set key.
• If the Touch Panel cannot be adjusted, contact your service represent-
ative.
[Message Display Time] Specify the duration of time for displaying warning messages, which ap-
pear, for example, when an incorrect operation is performed.
[LCD Brightness] Adjust the brightness of the Touch Panel.
Settings