Konica Minolta bizhub PRO 950 - Manual (Page 142)

PCL Printer Driver Setting (Windows) 8
bizhub PRO 950 8-25
Output - Output Method - Wait Mode/Proof Print
Outputs the test print and checks current setting from the control panel of
copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Preferences] to open the [Printing Preferences] window.
3
Select [Wait Mode] or [Proof Print] in
the [Output Method].
4
Click [OK] to close the [Printing Pref-
erences] window.
5
Click [Print] to perform printing from
the application.
– When [Wait Mode] is selected, it stops without being printed.
– When [Proof Print] is selected, only one set is printed and it stops.
On the copier's control panel, the Mode Check screen appears.
6
In case of [Proof and Print], [MACHINE] tab blinks on the right above
the copier touch panel screen. Press [MACHINE] tab.
Mode Check screen appears on the control panel of copier.
7
Confirm the current settings.
– If you do not change any setting,
proceed to the step 10.
8
If necessary, select the item and press the [ChangeSatting] to change
settings.
9
Press the [OK].
The Mode Check screen will be restored.
10
Press [START] to resume the rest of the print job.