Konica Minolta Bizhub 215 - Manual (Page 29)

bizhub 215 3-13
3.4 Manual installation using the Add Printer Wizard 3
7
Click [Browse...].
8
Select the driver information file in the desired printer driver folder on the CD-ROM, then click [OK].
% Select a folder according to the printer driver, operating system, and language to be used.
% The driver information file is "KMWTG.inf" for the GDI driver, "KMWTP.inf" for the PCL driver and
"ONX.inf" for the XPS driver.
9
Click [Next].
10
Follow the instructions on the pages that follow.
% When the Verify the publisher dialog box of [Windows Security] appears, click [Install this driver soft-
ware anyway].
11
Click [Close].
12
After finishing the installation, ensure that the icon for the installed printer appears in the [Devices and
Printer] window.
13
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver updating.
Tips
- In Windows Vista/Server 2008, [Update Driver...] is also available. In Windows Vista/Server 2008, use
[Device Manager] to open [Properties] of this machine that is displayed in [Other Devices]; you can
specify [Update Driver...].
To use [Device Manager], right-click [Computer], click [Properties] - [Tasks], and select Device Manag-
er.
3.4.2 Windows XP/Server 2003
For network connection (LPR/Port 9100)
To use LPR/Port 9100 printing, specify the port while installing the printer driver.
Settings for the machine
To use Port 9100 or LPR printing, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings of this machine, refer to "Network settings" and PageScope Web Con-
nection - [Network] - [TCP/IP Configuration] and [Network]-[IPv4 Configuration] of [User's Guide Network
Administrator].
Installing the printer driver using the Add Printer Wizard
0 Administrator authority is required for installation.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
% The required CD-ROM varies depending on the printer driver. Select the CD-ROM corresponding
to the printer driver used.
Items to be configured Description
IP address In [NETWORK SETTING] on the Control Panel of this machine, spec-
ify the IP address.
RAW port number To use Port 9100 printing:
In [IPv4 Configuration] for the machine, enable the RAW port number
(initial setting: [9100]).
LPD Setting To use LPR printing:
From [TCP/IP Configuration] - [LPD Setting] for the machine, enable
LPD printing.