Selecting the finishing method, Selecting the finishing method -18 – Konica Minolta bizhub C650 User Manual
Page 47
2
Using copy functions
2-18
C650
Usin
g co
py fu
nct
ions
Chapter 2
*4
The Punch settings are available only if the punch kit or Z folding unit is
installed with the optional finisher.
*5
The number of punched holes differ depending on the country (region)
where the unit is installed. For details, consult your technical
representative.
*6
The Half-Fold, Center Staple & Fold and Tri-Fold settings are available only
if optional finisher FS-608 is installed.
*7
The Z-Fold setting is available only if the Z folding unit is installed with the
optional finisher.
!
Detail
If the post inserter has been installed on the optional finisher, the finisher can be
operated manually. For details, refer to the User’s Guide [Copy Operations].
Follow the procedures described below to select Finishing settings.
Selecting the finishing method
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.