Konica Minolta bizhub C35 - Manual (Page 109)

Registering a program destination 6-6
Registering a program destination
The procedure for registering a program destination for fax transmission is
described below.
Program destinations can be registered from the control panel of this
machine or from PageScope Web Connection. The following procedure
describes how to register from the control panel of this machine.
"
For details on registering from PageScope Web Connection, refer to
the [Reference Guide].
1
Press [Fax] or press the [Fax] key to display the initial Fax screen.
2
Press [Settings], and then select the appropriate settings on the [Scan
Settings], [Comm. Settings] and [Original Settings] screens.
– For details on the [Scan Settings] screen, refer to “Specifying scan
settings” on page 3-11.
– For details on the [Comm. Settings] screen, refer to “Specifying com-
munication settings (G3 fax)” on page 3-13, “Useful transmission func-
tions (G3 fax)” on page 3-14 and “Specifying e-mail (Internet fax)
settings” on page 3-17.
– For details on the [Original Settings] screen, refer to “Specifying docu-
ment settings” on page 3-18.
3
Press the [Mode Memory] key.
4
Press [Register].
5
At [Name], enter the name.
6
At [Dest.], specify the destination.
– Press , select the address book or group destinations, and
then press [OK].
7
Press [OK].