Konica Minolta bizhub C35 - Manual (Page 33)

[Fax Settings] (Admin Settings) 2-8
Settings
1
Press the [Utility/Counter] key.
2
Press [Admin Settings].
3
Type in the administrator password (Default: 12345678), and then press
[OK].
The Admin Settings screen appears.
4
Press [Fax Settings].
The Fax Settings screen appears.
"
All factory default values are shown in bold.
[Sender Settings]
Item Description
[Sender] Type in the sender’s (this machine’s) name. (up to 30
bytes)
The information specified here is printed as the trans-
mitting subscriber identification in the header of sent
documents.
[Sender Fax No.] Type in the fax number of this machine. (up to 20
characters)
The information specified here is printed as the trans-
mitting subscriber identification in the header of sent
documents.
List Print Fax Setup Pg
Fax Image
Initialized
Fax Factory
Default
Fax Target
I-Fax RX Error
Report